Visit The Dirt Forum for More Information

Author Topic:   alternator mounting
stockcar5x
Member
posted May 13, 2002 08:51 PM
If you alternator is of the small 3 lug type, and you can afford it, CV products makes a sweet mount that is as rigid as it comes. We used to used the usual cobbled together trash, and would watch the belts do the shimmy shake, and come off now and then. With CV's mounts, belts do not even wiggle. I am sure there are others suitable, but I will use nothing else.


o5racer
Member
posted May 13, 2002 10:41 PM
both speedway and midwest sell an alt mount for short water pumps. it mounts on the intake just to the pass side of the thermistat housing. works great for heads that dont have accesory holes.


Back to the Archives