Visit The Dirt Forum for More Information

Author Topic:   fuel pump question
justin
Member
posted May 08, 2002 05:54 PM
I just installed my new Carter fuel pump w/ a -10 inlet and -8 outlet and I was wondering how to do I plumb the return line back to the fuel cell since there is just the inlet and outlet fittings. Also, I was planning on running 1/2" (-8 AN) fuel line all around the car and need to know if it would be ok to replace the -10 inlet w/ a
-8. Any help for a newbie would be greatly appreciated fellas. Thanks in advance.

Justin

WPP
Member
posted May 08, 2002 06:55 PM
WHY ARE YOU RUNNING A RETURN LINE IT SIMMS YOU ARE RUNNING GAS IS THE FUEL PUMP FOR GAS


justin
Member
posted May 08, 2002 07:49 PM
Yes it's for gas. Are you saying that I don't need a return line back to the fuel cell? Thanks again.

Justin

ryan
Member
posted May 09, 2002 12:50 AM
We have never run a return line never had any problems


justin
Member
posted May 09, 2002 09:46 AM
Thanks for the info on the return line fellas. What about swapping the -10 inlet w/ a -8?

Justin

Back to the Archives