Visit The Dirt Forum for More Information

Author Topic:   Reverse Flow LT1 Heads
jammin
Administrator
posted April 06, 2002 02:02 PM
Do any of you know if these heads can be modified in some way to work on older engines? The water flow is reverse, so the heads don't have the end water jackets that run thru the intake. Any ideas?

jammin


ford5
Member
posted April 06, 2002 07:02 PM
can you use a gasket for a template and drill them?


jammin
Administrator
posted April 06, 2002 07:13 PM
That was my thought, but I dont what I would be drilling into.


jammin


ford5
Member
posted April 07, 2002 09:07 AM
don't know that either, but you will just have to do it and see lol


dirtracer14
Member
posted April 07, 2002 07:27 PM
Funny thing, my dad has a set with a old style intake on it. He had to drill and tap the heads to bolt the intake down. Then he tapped out the front holes for fittings to run the water in. Now you have to do somthing with the front water passage they dont overlap. Im sure there is more he did and hes not done its just sitting on a mock up block....so ill let you know what he finds out.


Back to the Archives