Visit The Dirt Forum for More Information

Author Topic:   Holley carb mounting?
34Racing
Member
posted February 08, 2002 06:55 PM
buy an adapter or have someone make you an
aluminum spacer


34Racing
Member
posted February 09, 2002 06:46 PM
Canton makes a nice phenolic spacer that is adjustable front to back so you can put the two barrel over the secondaries on the Q-jet
intake.


racer2
Member
posted February 10, 2002 07:39 AM
napa has one for under 20.00 ..aluminum
and ive seen others in circle track books
for around 75.00..


go4win
Member
posted February 10, 2002 06:49 PM
If your rules allow,you might want to look into a Flow control air cleaner.This is the air cleaner that has the tongue that hangs down on the lid that reduces intake turbulance.Also since it is not made out of metal the air going in the engine should be somewhat cooler.Available for carbs with or without choke tower.


EVANSRACING24E
Member
posted February 15, 2002 10:37 PM
check with k&n about a filter and base. it will cost a little more but it is reusable and they have alot of applications. also will increase power somewhat.


Back to the Archives