Visit The Dirt Forum for More Information

Author Topic:   Cam clearance
istock59
Member
posted January 28, 2002 09:46 AM
When using stock 5.7" rods in a 400 block, which rod bolts need clearanced for the cam? I know you don't have to do them all, but don't know which ones.

Also, how much do you have to grind off? Anybody got a measurement to work with?

Thanks in advance.

wkramer
Member
posted January 28, 2002 11:25 AM
all your grinding off is a small portion of the rod bolt. i would put the block together and check which ones need clearancing and pull them out and touch them up. i only had a couple.if your trying to do this without putting it together grind a small amout of each inboard rod bolt. you may end up taking it apart anyway.


istock59
Member