Visit The Dirt Forum for More Information

Author Topic:   cams
D12
Member
posted November 16, 2001 11:06 AM
Does anybody know why we can't turn over 6000rpms? We've heard that it is the cam is degreed in wrong. any info would be nice.


dreamcatcher
Member
posted November 16, 2001 12:42 PM
what size cam are you running some wont turn that much .



KWTracer
Member
posted November 16, 2001 03:51 PM
Push right foot down harder.


4barrel
Member
posted November 16, 2001 09:51 PM
Most any cam will turn 6000rpm, If you are going to degree a cam you have to do it to cam specs not just what somebody thinks it should be.


Roadhzrd
Member
posted November 18, 2001 01:34 AM
Worn springs will usually cause a high end miss. If a cam is that far degreed out you would probably notice it thru out the revs not just at 6000 rpm's


36k
Member
posted November 18, 2001 09:15 AM
Make sure you have the correct rotor in the dist. And the terminals are brass not aluminum


Back to the Archives