Visit The Dirt Forum for More Information

Author Topic:   Heads for 406 and 377
Coolhand
Member
posted November 10, 2001 08:04 PM
looking for some help on what heads to run on my 406 and 377 engines for next year. I run a Dirtworks car in Southern Illions at ump tracks. We are allowed to run aluminum heads. Just purchased the 377 shortblock with keith black flat top pistons. I have been running 461 steel heads with 2.02 and 1.60 valves 64 cc chamber also have a set of 882 heads with a 78 cc chamber. I am wondering what other than the weight is the advantage to running aluminum head and if anyone has a recommedation on what heads are the best Thanks


Coolhand
Member
posted November 12, 2001 06:36 PM
Help


Dirt2race
Member
posted November 12, 2001 07:48 PM
I honestly believe it depends on the RPM you will turn as to wether you need huge heads to help your engine perform. The big heads mainly have an effect when you are turning big RPM's. I am talking 7500 to 8000. I don't imagine you would be turning these numbers, so what you described for heads sound fine to me. Just make sure they are port matched and see if you or someone else can polish the runners for smoother airflow. The weight thing is probably your biggest concern at this point. And aluminum heads are also repairable and they disapate heat better. Good luck.


Wild Bunch Racing
Member
posted November 13, 2001 07:54 PM
Well I really believe in the aluminum head because it is lighter and gets rid of the heat faster. Now as for your head volume I recomend running the smallest chamber possible that still offers the most flow possible. I run aluminium 48cc chamber heads that really flow alot because of the way it is ported out and the size of the runners. This gives me alot of compression and flow.
I have 2.08" intake valves and 1.60 exhaust

[This message has been edited by Wild Bunch Racing (edited November 13, 2001).]

[This message has been edited by Wild Bunch Racing (edited November 13, 2001).]

Coolhand
Member
posted November 14, 2001 08:08 PM
Thanks guys"


dirtracer17
Member
posted November 20, 2001 09:08 AM
I race at Mt Vernon most of the time but am planning a few trips to PIR and KLMS next year


Billy
Member
posted December 11, 2001 01:07 PM
Cast Iron Heads Worked For Me


Back to the Archives