Visit The Dirt Forum for More Information

Author Topic:   water pump question
brownstone
Member
posted August 17, 2001 07:35 AM
Do yourself a favor and get a Stewart waterpump. The way these are built, they'll last a good long time...


69-er
Member
posted August 17, 2001 01:01 PM
Anything '68 and earlier will have the short pumps.

Larry

brownstone
Member
posted August 17, 2001 01:53 PM
69er
Thanks for your help.

Now unfourtunately I have a new water pump issue.

I am using a Canton TIming COver and when I try to mount up a short water pump, the back of the water pump hits and will put pressure the timing cover.

I tried going with a double gasket but that still does not give me enough clearance.

I cannot use a long water pump because it does not leave enough room to run the belt/mandrel set up for the belt drive fuel pump.

Has anyone run into this problem before please let me know.
Thanks so much


brownstone
Member
posted August 17, 2001 03:50 PM
ok problem solved talked to CV products and they make spacers from 3/8 to 1/2 that go between the block and the water pump and this should solve the problem.

Thanks for everyone help !!!

Back to the Archives