posted November 23, 2000 06:06 PM
what is the easiest way to remove the pilot bushing?
posted November 23, 2000 07:36 PM
bk19, Fill the center with grease then put your clutch alignment tool in there and tap enough to move the bushing out a little. Then repeat this a few times.......it works like a hydraulic pump......Jeff
Racer 111 Member
posted December 02, 2000 10:41 PM
If grease doesnt work Auto Zone rents a tool for a couple of bucks.
9w RACN Member
posted December 26, 2000 12:18 AM
TAKE A 5/8THS BOLT AND RUN IT INTO THE BUSHING WITH A AIR WRENCH. THE BOLT THREADS WILL BITE INTO THE BRASS AND WHEN IT BOTTOMS OUT IT WILL BACK THE BUSHING OUT!