Visit The Dirt Forum for More Information

Author Topic:   New Body
ZachmanJ
Member
posted September 24, 2002 07:27 AM
I recently bought a 85 monte carlo and i was wondering if anyone could help me out with info in how to feplace the quarter panels. Should I cut them off with a torch or what? thanks


Geffy95x
Member
posted September 24, 2002 09:24 AM
You should unbolt the fenders,and when you re-attach them just use 3 or four bolts.



ZachmanJ
Member
posted September 24, 2002 10:38 AM
Thanks smart *** . what I was trying to say in that last post was that I need tips on how to get the quarter off and a new one on with it being the least noticeable, because as you all know,looks are everything. Thanks for any help.


redneck racing
Member
posted September 24, 2002 02:07 PM
Cut them off with a sawzall and pop rivet them on over the old ones, if your worried about looks tack weld them one and fiberglass them in it will look stock but much more work seeins there only gonna get destroyed. Eddie


teamstertom
Member
posted September 24, 2002 04:35 PM
Keep the replacement panels process easy,but keep it clean.

Take your sawzall and cut the old pannel off leaving about 1 inches of old panel left to attach the replacement with. Take your vise grips and place the panel into position,get out your cordless drill and three sixths drill BITS and go to work.

For rivets use the three sixths big head alum. rivets which your can get at your racer supply house.

Don't get real carried away with bondo or fiberglass work because that panel just may get ripped off next week.

If you take your time and use your best effort,the panel will look very nice from the stand.

I cut may panels off with a Metabo Cut Off Grinder with a 6 inch cut off disc which works very well,but a sawzall works just as good.

carscomefirst
Member
posted September 24, 2002 04:50 PM
we have some good tips here i personally think rivits look like crap we always just weld them on and use light weight filler from napa makes it look real clean a weld is alot stronger them those dang rivits too . i have seen pleny of guys that have cars that rivit panels on and they look like they exsplode with very little contact


LUBEGUY07
Member
posted September 24, 2002 06:15 PM
i agree with 17j the rivites look like crap welding them on is the way to go and bondo covers it up real good and u can always cover bad body work with stickers or lettering



Back to the Archives