Visit The Dirt Forum for More Information

Author Topic:   Front stub
intimidtr3
Member
posted June 16, 2002 09:31 AM
I have an 80 Regal that needs a front stub replaced,anyone know how hard it is.I hate to trash the car and was trying to figure out how hard it was.I dont want to have to build another car.Any help is appreciated.


wam24u
Member
posted June 16, 2002 09:56 AM
I have replaced the stub on mine a few times..it is farly simple I would take it to a frame shop first to see if the can staight it first ..


racer17j
Member
posted June 16, 2002 10:04 PM
i agree with pickel try to have it pulled first and then if all else fails put a stub under it it's not all that hard if you have somebody that knows what they are doing as for building a new car do like my buddy did he put a whole new frame under his just cut it off lifted it up and rolled another under it he had his done in 2 nites


powerglides
Member
posted June 17, 2002 06:13 AM
If you do it in your shop take lots of measurements from the donor frame before you cut the stub off, then you you can just weld it on in the same place. Its not rocket science go for it.


Back to the Archives