Visit The Dirt Forum for More Information

Author Topic:   Wrecking yard spring rates
loojack
Member
posted March 13, 2002 06:32 PM
Other than an expensive spring rate tester, is there an easy way to get an idea of wrecking yard springs? Is there software the numbers(Diameter, active coils, wire size)can be entered on the web, or for sale? How 'bout a homemade tester? Thanks


4d_POWER
Member
posted March 13, 2002 07:36 PM
http://www.proshocks.com/calcs/coilsprate.html

I believe that auto parts stores that sell springs for cars and trucks would have a catalog with the length and rate of each spring for any particular car/truck, that would be nice to have, save many hours diggin thru a junkyard...LOL!


Good Luck



jammin
Administrator
posted March 13, 2002 07:56 PM
Naw, whats wrong with you guys.....lol..take a look in the toolbox, put something up for ya tonight.

jammin


jammin
Administrator
posted March 13, 2002 07:57 PM
Sorry, I put up the leaf version of it...I will get the spring version up for it also...


jammin


jammin
Administrator
posted March 13, 2002 08:31 PM
There ya go...done deal..check the toolbox.

jammin


racer17j
Member
posted March 14, 2002 12:25 PM
napa would have the book of spring rates thanks jamm for more tools but it sure does make it alot easier to look for a certin car in the yard then pulling 20 sets of springs and haveing to check them all


loojack
Member
posted March 14, 2002 03:32 PM
Thanks, Jammin. That will help alot. Now we can calculate what a spring will be if coils are cut off. Thanks to all again!


Back to the Archives