Visit The Dirt Forum for More Information

Author Topic:   ford 9 in width
racer17j
Member
posted August 07, 2001 01:22 AM
ok i found a 81 f150 i messured from the baCK PLATES AND IT MEASURES 58 IN BUT THE HOUSING ITSELF IS A LIttle wider will this fit without narrowing it in a metric car. and anybody have any idea what gear it might have in it it has a 302 /w auto trans if this has to be narrower how much of a (pita)is it


motorsport 18
Member
posted August 07, 2001 07:57 PM
what you need to measure is drumb to drumb because that is youur wheel track it should come out to be62 to 64 it will fit but you want tto keep your front and rear close with in 2'wider rear


URDUSTED
Member
posted August 08, 2001 12:51 AM
found that the only 9" that is stock narrow enough is out of 67-69 Mustangs, GOOD LUCK. Did see in my CIRCLE TRACK magazine that you can order a housing with axles, any width for $595. Good price in my opinion.


VIPER000
Member
posted August 08, 2001 10:56 AM
I BELEAVE THE 77 BRONCO'S ARE THE RIGHT LENGTH. TRY WWW.HYPERMART.NET/9INCH.HTML#HOUSING


redneck bubbas racing
Member
posted August 11, 2001 11:57 PM
From the steve smith book-
Axle flange to axle flange
57-64 ford 57.25
64-71 ford full size 61
67-71 mustang 59
79-81 licoln vresailles 58.5 Disk brakes baby!
77-80 granada 58.5
72-79 inter. and full size 63
77-86 f150 and bronco 65.25
77-86 e150 van 69.25

From memory- 67-72 ford f150 63

Hope this helps, Kenneth


redneck bubbas racing
Member
posted August 12, 2001 12:00 AM
One more thing. Just look at the tag. The first number is usaully hard to read with out pulling the nut off. Ford was real nice and stamped the ratio on a tag and it is attatched at the pumpkin. Most of the time in trucks you will find 2.75 in auto's, 3.25 in standards. Lots of the cars have 2.75 and 2.47


dirtracer17
Member
posted August 13, 2001 06:41 PM
17, do you run the stock upper and lower control arms? What did this rear cost with shipping? . Deed


racer17j
Member
posted August 14, 2001 01:22 AM
i wave all the equeptment ot narrow it but just would lkike to save time by findin one that i can just throw on the jig and burn it


dirtracer17
Member
posted August 14, 2001 09:27 AM
Thanks 17, I cannot run the 9" yet, but I see it may be an option in the future. So I'm getting as much info. as I can. I saw the 17 picture awhile back, now I'm tring to get my 17 in the winners circle. Thanks again. Deed


dirtracer17
Member
posted August 14, 2001 09:07 PM
Deed, keep on trucking, that was my first ever win of any kind, not even a heat race win!. Took me over 5 years to get it.Still trying to get another and still haven't got a heat win yet!Oh well, rather have 1 feature win as none at all!


Back to the Archives