Visit The Dirt Forum for More Information

Author Topic:   Exhaust Pipe Sizes
posted July 17, 2001 01:37 AM
How does one determine what size exhaust they need for an engine? I run an Hobby
stock w/350sbc standard bore,flat tops,9-1, rochester2bl.,Oemheads,cast intake and exhaust--the cars I race against
have anywhere between 2-3" pipes on their cars.

posted July 17, 2001 05:52 PM
I would think 2", 2 1/4" max would be plenty for a stock intake/exaust set-up. Alot I've seen only run them 1/4 to 1/2 way back on the car anyways, and you want some back pressure.

posted July 18, 2001 12:52 AM
the way we always tell where to cut them is make them plenty long and then paint them white start the motor let it run for a while then cut it off where the paint stopped burning off

Back to the Archives