Visit The Dirt Forum for More Information

Author Topic:   3 Link in design
Strokin3
Member
posted December 27, 2000 05:09 PM
Got the car stripped down and ready to install the pickup points. My plan is to have
identical mounts in front and behind both left and right sides for coil sliders. In addition I am going to offset the right side
framerail to allow a spring mounted on top of
the axle for another option. With these options my I should be able to come up with
something my driver can deal with. What do yall think. Does anyone know how to make the
window larger that this report is in???????

------------------
Artie Perilloux


MOD RACER#93
Member
posted December 27, 2000 07:04 PM
ModRacer#93,I've ran the 3 link before with
eliminators in front of the axle on both
sides and this car worked extremely well,
sold it and it continued to work well, in
fact won the points at our local track. I
don't know why I want to change, well I guess
I do. If you can't dazzle them with briliance
you can always baffle them with bullsh$t. If
the locals look under the rear and see a C/O
on one side and a 5" spring on the other they
are all liable to break out the torches.

------------------
Artie Perilloux


bbracer17
Member
posted December 30, 2000 04:00 PM
I see alot of cars built like that, There is also a clamp on bracket for the rear end that will mount your shock, trailng arm, and spring without the eliminator in front or behind the rear end in case you don't want to use an eliminator at all.


Back to the Archives