Visit The Dirt Forum for More Information

Author Topic:   metric mod ride height
2high
Member
posted February 13, 2000 09:37 AM
any metric mod drivers out there? what are you running for ride height?


jammin
Administrator
posted February 15, 2000 08:49 AM
Come on guys, I know there are some of you out there that can help 2high.


dirt mod 70
Member
posted February 15, 2000 04:26 PM
rr 8" lr 7 1/2" rf 7 1/2" lf 7"
i run this high for weight transfer/side bite with soft springs
this is higher than probably most run but it works for our cars


krazy 76
unregistered
posted February 15, 2000 06:37 PM           
I don't run a mod anymore but I used to. My rideheights were as follows lf 5" rf 5 3/4" lr 5 3/4" rr 6". It was a Wissota mod before the rules were opened up but it was VERY successful. I also would measure from the lower A-frames to the frame and the r side was 2 3/4 inch and the l-side was 2 1/2 inches. The upper A angles were 15 deg on the rf and 18 deg on the left.


2high
Member
posted February 15, 2000 06:54 PM
thanks for the input


Back to the Archives