Visit The Dirt Forum for More Information

Author Topic:   another bender question
dqr-7
Dirt Full Roller

Total posts: 28
posted January 17, 2004 10:14 AM  
does anyone know if there are 3 inch dies for mandrel benders available. if so who makes them.

[This message has been edited by dqr-7 (edited January 18, 2004).]

racerguy500
Dirt Maniac

Total posts: 168
posted January 21, 2004 05:04 PM  
for what diameter tubing?

NYhick
Dirt Maniac

Total posts: 130
posted February 24, 2004 06:20 PM  
Maybe......3 inch???????

Ego Racing
Dirt Forum Champ
Total posts: 724
posted February 24, 2004 07:28 PM  
What racer means is 3 inch Diameter tubing or 3 inch radius bends?

racerwilson
Dirt Freak

Total posts: 357
posted March 07, 2004 07:13 AM  
check out WWW.americanbender.com or WWW.lowbucktools.com Both have hossfeld type units. lowbucks is nice cause it is self contained on a cart. I took an old hossfeld I bought for $100 and build a hyd. unit using a 24" ram from northertool on shot of ram makes 90 deg bend. with old gm p/s pump and old 110 elec motor. Have about $300 total wrapped up in it.

Back to the Archives