Visit The Dirt Forum for More Information

Author Topic:   Metric car front roll center
stacks23
Dirt Roller

Total posts: 5
posted December 17, 2005 06:00 PM  
When you move the rollcenter up or down which way has what effect on the handleing of the car? Thanks

john56h
Dirt Full Roller

Total posts: 70
posted December 17, 2005 08:29 PM  
I believe that it is the LOW roll center that causes excessive body roll. If the roll center is raised there is less mass rotating over the roll center, thus making the car handle better. Picture roll center as a lever. The longer the lever the easier it is to roll the weight. A low roll center has a long lever...high roll center has a shorter lever. If you were to plot the front roll center on many cars it would be below ground level!

YAZ
Dirt Maniac

Total posts: 163
posted December 18, 2005 09:39 PM  
what is the best way to raise the roll center on a metric?

marp
Dirt Roller

Total posts: 19
posted December 19, 2005 05:24 PM  
i'm gonna try the truck upper balljoints.2wd chev.

neil rucker
Dirt Forum Champ
Total posts: 883
posted December 22, 2005 06:52 PM  
alot of work to do it right. well worth it i think.

  

Back to the Archives