Visit The Dirt Forum for More Information

Author Topic:   Metric Set-Ups
Dirt Newbie

Total posts: 4
posted December 04, 2005 06:51 PM  
Just wouldering if anybody could tell me a good starting set-up for a Monte Carlo just need Ride Height and Weigh Percentage THANKS

Steve Dupree
Dirt Freak

Total posts: 357
posted December 04, 2005 07:17 PM  
Ok just too help!!!!!!!!!! LOL lf-7 lr7.5 rf7.5 rr 8.0.

Percentages: 53 to 54 left/Cross depending on what you like more cross more tightness,Alot like 51 to 54 cross. We like 49.0 Rear as much as you can get do too weight rules we run 500 lbs over weight rule and it is a bad car.

Dirt Forum Champ
Total posts: 5459
posted December 04, 2005 07:43 PM  
Now where are you guys taking these measurments from? Also, does anyone weld tabs on for measuring & referance points (for the aftermath of a confrentation with the magnet)?
Im seting up a full size, and kinda been watching what everyone else is recomending to each other.
Thanx again!

[This message has been edited by crazybry46 (edited December 04, 2005).]

Dirt Freak

Total posts: 315
posted December 05, 2005 09:02 AM  
I take ride heights from the flat part of the frame rail just behind the front stub and in front the kickup on the rear. On the frame pic where the X-5 is marked.

[This message has been edited by eborcim (edited December 05, 2005).]

Dirt Newbie

Total posts: 4
posted December 05, 2005 10:10 AM  
Thanks to all of you this info well help and just maybe next year I might win a race.

Dirt Newbie

Total posts: 4
posted December 06, 2005 06:07 PM  
Mr. eborcim is the anyway you can email me this information you put on here. My email is THANKS

Dirt Freak

Total posts: 257
posted December 07, 2005 04:53 AM  
Hey C7racer, look in the toolbox section that drawing you want is in the toolbox.


Back to the Archives