Visit The Dirt Forum for More Information

Author Topic:   Offset cage metric
RACEINMUD
Dirt Freak

Total posts: 323
posted November 01, 2005 08:51 AM  
Hi All, going to build a new metric and was looking at cage kits to buy. Would like to go with the 1 3/4 four post and 1 1/2 front & back. Here's my ? Is there a kit you have used that is made to be set back and off set? Everything I've found seems to be the "classic" cage. Thanks, Race

pdub25
Dirt Full Roller

Total posts: 57
posted November 01, 2005 11:38 AM  
any modified cage will work. got mine for free from a mod racer that had a wrecked one.

ss99
Dirt Maniac

Total posts: 120
posted November 01, 2005 12:28 PM  
CSC will custom make any cage to your measurements. www.cscracing.com

If you order a standard width cage, just cut the required length out of the main cage width, sleeve it where you made the cuts, and weld back together.

enduro80
Dirt Roller

Total posts: 12
posted November 01, 2005 02:37 PM  
I was thinking of doing that,but with an older Rocket Chassis.If you cut the drivers side cage and connect the front and rear frame in a straight line instead of where it turns out it would work.At least the one I had would have.Would have been real trick .I was afraid of the Officials having a fit though so i s****ped the idea.Maybe in the future....Enduro80

------------------
racecar spelled backwards is racecar

racer17j
Dirt Forum Champ
Total posts: 5390
posted November 01, 2005 05:19 PM  
Thanks All.

    

Back to the Archives