Visit The Dirt Forum for More Information

Author Topic:   forward bite again
eaton89
Dirt Freak

Total posts: 268
posted September 18, 2005 09:37 PM  
Ok its my turn to ask the same question. Sat night I went to a different track(Price, Utah)desert thunder raceway. Car was good and I took 3rd in the main but front tires kept sliding up the track. Car really rolled over. Almost lifting left front(son said it was in 1st heat race). I think the panhard bar is what I need to change but I want some better sorces of info(not mine,lol) Car has 970 lf spring 1150rf,250lr,200rr. 53%cross,53%left 50% rear and about 200lbs rear bite.Car ways 3420 with me and a tank of expensive gold. I have a 3 link rear, stock lowers and a adjustable upper. Adjustable on both ends panhard bar mounted from left side frame to right side rear end on the back side of housing. If I move the bar up the same on both sides will that lesson the roll of the car and will that help the front to turn or am I sniffing to much race fuel,lol.

[This message has been edited by eaton89 (edited September 18, 2005).]

eaton89
Dirt Freak

Total posts: 268
posted September 19, 2005 07:47 PM  
Come on!! Some one has to tell me my numbers all out of wack and I'm going to hit the wall, LOL. I think it does have a little to much rear bite. But Im hoping some one else has some advice.

cd2
Dirt Maniac

Total posts: 161
posted September 19, 2005 09:21 PM  
eaton89
Where is the car pushing the front end up hill? Is it on entry at the center on the gas or on exit? Explain the best you can how the car enters the corner & what happens from there.
cd2

    

Back to the Archives