Visit The Dirt Forum for More Information

Author Topic:   How do I install weight jacks?
Dirt Roller

Total posts: 9
posted September 12, 2005 08:24 AM  
How do I add weight jacks to my metric framed car? I'm lost on what holds the top of the spring in place. What parts do I need to order and what length spring do I need to run? If someone could please give me a parts list of what I need to order that would really help. Also if anyone has any pictures that would be great. Thanks

sc1 racing
Dirt Freak

Total posts: 419
posted September 12, 2005 02:22 PM  
you can buy a kit. it is just a nut, a rod, and a spring plate. you cut a hole where shock goes, weld the nut screw in the rod and put spring plate on.. you will have to relocate shocks

Dirt Forum Champ
Total posts: 5390
posted September 12, 2005 02:42 PM  
So do I install a 6x6" spring bucket on the front and the rear? Or is there a better way of doing the front. On the rear is it better to weld the bucket at the bottom of it so you can use a longer spring or do I weld it with the top flush and use like a 12 or 13 rear spring?


Back to the Archives