Visit The Dirt Forum for More Information

Author Topic:   oem backspacing
tjn
Dirt Roller

Total posts: 12
posted August 17, 2005 09:45 AM  
I CAN ONLY RUN 15X7 OEM WHEELS,THE ONES I HAVE HAVE 4 INCH BACKSPACING,WHICH I BELIEVE ARE OFF A CAPRICE.DOES ANY ONE KNOW OF SOME OEMS THAT HAVE 2OR 3 INCH BACKSPACING?

racer17j
Dirt Forum Champ
Total posts: 5390
posted August 17, 2005 05:20 PM  
tjn,
What do your rules say about wheels? Do they say "stock wheels only"? If so, check out Aero Race Wheels, or Bassett Wheels. Both of these companies sell at D.O.T. stamped wheel that is street legal and, by the letter of the rule, conform to a "stock wheel" rule. Offsets range from 1 to 4 inches and they weigh 21 lbs. Prices range from 42-45$ per wheel. Any track that does not allow these type of wheels is not very safety concious.
-0LT

DangerZoneRacing
Dirt Maniac

Total posts: 176
posted August 17, 2005 07:09 PM  
the mid to late 90's 2WD S-10's have a 3 1/4 inch back space. Lots of guys use them around here cuz there very strong also.

tjn
Dirt Roller

Total posts: 12
posted August 18, 2005 09:06 AM  
THE RULES SAY JUST OEM WHEELS,I'LL LOOK AT THE S10 WHEELS,THANKS FOR THE INFO.

DangerZoneRacing
Dirt Maniac

Total posts: 176
posted August 18, 2005 10:46 AM  
there the ones that have like little triangles cut in them that have a little twist to em. good luck.

    

Back to the Archives