Visit The Dirt Forum for More Information

Author Topic:   Panhard now install , what angle?
RACEINMUD
Dirt Freak

Total posts: 323
posted July 13, 2005 04:37 PM  
Just got the panhard in my metric installed halfway in the season. Mounted it lf frame and to rt side tube by the spring. Was going to run it level first nite out and see what happens. Looking for advice on adjustments after I see what it does. Going to remove the left upper. Rt upper is 15 degress down and lowers are running 5 to 6 degress up. Any help would be appreciated. Thanks! Race

racer038
Dirt Maniac

Total posts: 111
posted July 15, 2005 05:03 AM  
I added a panhard bar to my stock rear end last year and was very pleased. Mounted bar behind axle, right side on tube, left side on frame. Axle mount was 3" lower than frame mount. Center of bar was level with the center of the axles. Worked very well for me. BTW my bar was 33" long. One website said not to angle the bar more than 10% of the length. IOW, if your bar is 25" long, the maximum difference in height from end to end should be 2.5". Good luck!

    

Back to the Archives