Visit The Dirt Forum for More Information

Author Topic:   1982 Camaro struts ?
Terry52
Dirt Roller

Total posts: 6
posted July 02, 2005 11:24 AM  
will the strut camaro work well in street stock. what will i need to do to make it work better?

Tire Killer
Dirt Full Roller

Total posts: 47
posted July 03, 2005 12:22 AM  
ALOT of luck! JMO

sc1 racing
Dirt Freak

Total posts: 419
posted July 03, 2005 01:14 AM  
the strut cars are wicked fast. they just need the front stub to be plated, and the struts braced up well. for a good set up on racing stuts get ready to shell out 2-3 hundred per wheel

Terry52
Dirt Roller

Total posts: 6
posted July 03, 2005 08:26 AM  

this will be my first year racing street stock. the track is 1/4 mile gumbo at memphis Tn. thk. for any help on car set up and strut and spring to start with.

sc1 racing
Dirt Freak

Total posts: 419
posted July 03, 2005 03:43 PM  
i race memphis to. need to get ahold of joey jones..he has the fastest strut car around. or if you get on the midsouthracing.com website look up chief..i drive the blue and yellow sc1

Terry52
Dirt Roller

Total posts: 6
posted July 03, 2005 08:47 PM  
thk. i will do that.i am trying to get this car ready by the 1st of next year.its all new to me but i think i will love it.i like this page..its is some good people here.thx

pro1
Dirt Full Roller

Total posts: 26
posted July 04, 2005 08:23 AM  
You might whant too reinforce the spindals were the tierod gose one we lost 7 in 1 year.

Mr.Kwik
Dirt Forum Racer

Total posts: 87
posted July 04, 2005 09:25 PM  
I have had alot of luck with these cars. I have built a couple and am currently running one now. I have won my share of races and know I have the car to beat at our local track. I have and always will run a "stock" strut. I run monroe gasamatics front and rear, just make sure to put a zip tie on them and figure out how far they are traveling. Spring height is very critical on one of these cars. Don't go spending all of your money on racing struts if you don't have to. As for the spindles..... I have yet to break one. Good luck.

    

Back to the Archives