Visit The Dirt Forum for More Information

Author Topic:   three wheeling question
napa115
Dirt Roller

Total posts: 23
posted June 27, 2005 02:14 PM  
how would i stop the car from rolling on the right rear so bad? it has great forward bite for slick but pushes in middle and overheats right front and fades. car in real fast for 4 laps then starts to lose grip on right front. should i stiffen both rears until it turns better then try gaining forward bite in other ways? or can i leave it soft and find another way to get it turning in the middle?

napa115
Dirt Roller

Total posts: 23
posted June 27, 2005 07:21 PM  
oh forgot to tell you guys. its a coil car metric, centered upper link and track bar behind axle.

o5racer
Dirt Freak

Total posts: 402
posted June 27, 2005 07:31 PM  
What are you running for springs? Corner weights and weight placement would be helpfull as well as trailing arm an panhard bar angles.
Nick

Steve Dupree
Dirt Freak

Total posts: 316
posted June 27, 2005 07:52 PM  
Tire stagger also would help but need to know what you are running. That way the car could come to you instead of fading. Same preasure on both right and left rears will help or a 2 inch stagger will nelp. You will have to run different things and see what you like but before buying alot of stuff work with stagger first then air preasure then go to springs to fine tune the car.

napa115
Dirt Roller

Total posts: 23
posted June 27, 2005 08:31 PM  
rf spring 1100lbs
lf spring 900lbs
rr spring 150lbs
lr spring 175lbs
51% rear
52.5% left
52% cross
lower links are 21 inches 7 degrees up to front
upper link is 32 inches 12 degrees down to front
weight is accross back with about 80 lbs left rear (bite)
half mile flat slick by feature time
13 inch tall rear springs

napa115
Dirt Roller

Total posts: 23
posted June 29, 2005 08:53 PM  
had about inch and a quarter of stagger

redneck racing
Dirt Forum Champ
Total posts: 860
posted June 29, 2005 09:41 PM  
Napa did you get the PM I sent you? did you call Joe. Eddie

DangerZoneRacing
Dirt Maniac

Total posts: 176
posted June 30, 2005 03:41 AM  
Why would you want to fix it? lol late models and mods look so awesome when there lifting the LF....to me it looks even more awesome when you see a real race car doing it. lol. good luck with the problem tho.

wastedmoney
Dirt Roller

Total posts: 16
posted June 30, 2005 08:08 PM  
had that problem once check your front springs right front which was new only check out at 600 lbs suposed to have been 1100 lbs tks mikey

    

Back to the Archives