Visit The Dirt Forum for More Information

Author Topic:   camaro help
mark akins
Dirt Maniac

Total posts: 131
posted June 25, 2005 08:53 AM  
i am just finishing coverting my 81 camaro from pure stock to street stock and i need advice on set up. i will be running 3/8 mile clay with 20 degree banking. the car lbs is around 3100.

thanks mark

redneck racing
Dirt Forum Champ
Total posts: 860
posted June 25, 2005 07:51 PM  
What modifications have you made to go from pure stock to street stock? Eddie

mark akins
Dirt Maniac

Total posts: 131
posted June 26, 2005 01:27 PM  
I installed Urothane Bushings in the front end. 900 left front, 1100 right front, wb76, wb77, 2- wb94 shocks, spring jacks on the front and rear, modified upper control arm on the left front, motor set back 2 inches, the wheel offsets are 4-4inch back space, 1- 3 1/2 inch 1 - 3 inch and 1 - 2 inch. the maximum tire size 29 inches, the maximum cross section is 16 3/4. My plan is to use some used late model tires just to get started. My motor is a 350 chevy bored out 30 over, hump heads, solid lift cam, roller rockers, victor intake, holley 4 barrel. That is all I can think of. Any advise will be appreciated.

Thanks
Mark

mark akins
Dirt Maniac

Total posts: 131
posted June 28, 2005 06:22 PM  
i need :caster camber, ride hieght ,stager

just a starting point please

thank mark


redneck racing
Dirt Forum Champ
Total posts: 860
posted June 28, 2005 09:19 PM  
Caster
lf +3 rf +4
Camber
lf +1.5 rf -3.5
the ride height that I had for my Nova was lf 5" and the rf 6" 7" in the rear as for the stagger it was 2" all the way around and adjusted tire pressures hope this helps. Eddie

mark akins
Dirt Maniac

Total posts: 131
posted June 29, 2005 03:36 PM  
THANKS ! it is somewere to start


mark

    

Back to the Archives