Visit The Dirt Forum for More Information

Author Topic:   Ford Power Steering Mount
4d_POWER
Dirt Maniac

Total posts: 136
posted June 21, 2005 08:23 PM  
What are you Ford guys using for your Power Steering mount?...351W

I upgraded to a Stewart Alum Water Pump and Jones racing serp pullies and my old ps mount won't bolt up now(did bolt up to 2 holes tapped in the old cast wp)

Any suggestions on a Ford ps pump mount?
I am using a ps pump w/attached plastic reservoir.

I have a KRC head mount coming, hope I can get it to work.


Thanks!!

mike9
Dirt Full Roller

Total posts: 72
posted June 22, 2005 06:18 AM  
thats what i use the head mount pump bracket bolts to the 3 holes in the front of the left head you will need spacers between the head and the bracket i make mine out of steering shaft tubing just cut 3 the exact same length with a pipe cutter

ispin
Dirt Full Roller

Total posts: 48
posted June 22, 2005 07:13 AM  
I use the KRC setup for the head mount has the adjustment made into the bracket, real nice. I have the serp setup as well
KRC phone 770-422-5135 no website
351/400 bracket to left head krc30070
351/400 spacer kit krc30071 (no bolts)
not sure if you will need the spacer for the pulley or not I needed a .250 for the crank to get the belt right.

4d_POWER
Dirt Maniac

Total posts: 136
posted June 22, 2005 03:25 PM  
What kinda pumps you guys running?
Do you have a built in res or an external mounted tank?
I'm using a pump with the plastic can
attached.

KRC Website http://www.krcpower.com/

Jones Racing http://www.jonesracingproducts.com

Thanks for the replys!

[This message has been edited by 4d_POWER (edited June 22, 2005).]

gangster fords
Dirt Roller

Total posts: 13
posted June 22, 2005 11:22 PM  
we run a kse belt drive ps and fuel on a 302 it runs off of the lowerside on the right and a profile chevy pump on a windsor with the head mount on left side

ispin
Dirt Full Roller

Total posts: 48
posted June 23, 2005 06:22 AM  
I use the krc pump with the remote resivior never have any problems even with a 2:1 quickener

akadirtracer7
Dirt Freak

Total posts: 217
posted June 26, 2005 07:23 AM  
I been running a sweet bracket and an allstar pump with resevoir they a little cheaper than the krc stuff and good quality.It all bolts on the head.

[This message has been edited by akadirtracer7 (edited June 26, 2005).]

[This message has been edited by akadirtracer7 (edited June 26, 2005).]

    

Back to the Archives