Visit The Dirt Forum for More Information

Author Topic:   need rear %in our metric car
Dirt Roller

Total posts: 7
posted June 15, 2005 07:03 PM  
Any ideas to getting the rear % up in a metric car. We have a 15lb bumper engine set back as far as we can without cutting for fuel pump clearance. We cut as much out as possible in the front min wieght is 3200 we are 3330 already with 200lb added to the rear. any ideas thanks

Dirt Full Roller

Total posts: 56
posted June 15, 2005 07:08 PM  
ahhh **** just add more weight everyone else does and doesnt seem to car how the car now drives like a tank. Now Really Rear precentage isnt that big of a deal. When this guys scale there car they are take a 2 demisonary tool to a 3D problem. take what ever weight you have off. get it light. and move your battery around move your seat as far back as you can get it. You dont see any late model guys with anymore weight then they need to at the end of a race. They just build there cars right to begin with.

Dirt Roller

Total posts: 7
posted June 15, 2005 07:15 PM  
i think we need more rear % we have almost a stock 350 not enough motor to pull all that wieght car is very loose springs are lf1000 rf1200 lr250 rr200 ofsets are lf 2 rf3 lr2 rr4 how can we tighten it up?

Dirt Forum Champ
Total posts: 5390
posted June 16, 2005 07:42 PM  
there is still alot more that can come out heck i didn't even gut mine down as far as i could have and i have you with me and 22 gallons of fuel by about 200# before your lead. what is your rear now ? and where do you have that 200# mounted


Back to the Archives