Visit The Dirt Forum for More Information

Author Topic:   Rear springs
ispin
Dirt Full Roller

Total posts: 48
posted June 15, 2005 11:46 AM  
Was wondering what People thought about rear spring #'s
My car is a coil car #3410 full w/ driver
left% 54
Rear%54
cross% 50.5
lf 1050 rf 1250

lr 250 rr 200
The car seems to have some reverse rake to it and tight in center loose off not sure if rake is problem or to soft of rear spring. Seems to have good shock travel in the rear 3.5-5 in. Running the rear jacks down fixed the tight but was more loose off. Dont have scale #'s for the adjusments made.

STREET16
Dirt Maniac

Total posts: 158
posted June 15, 2005 12:48 PM  
If you are running stock trailing arms, try drilling some 3/16" holes in the rubber bushings in the right rear. It will loosen you up going in and tighten you up coming off.

CLBaker25
Dirt Maniac

Total posts: 193
posted June 15, 2005 01:55 PM  
Sounds like you took all of the bite out of the car. Put a some bite back in the car and it should loosen you up a little going in and tighten you up alot coming off.

    

Back to the Archives