Visit The Dirt Forum for More Information

Author Topic:   forward bite
Dirt Newbie

Total posts: 4
posted June 13, 2005 08:55 AM  
I have a 85 monte carlo i was wondering how to get forward bite i run LF1050 RF1200 LR200 RR225 49 cross 60pounds bite 52left 52rear 3200 pound car. 13inch springs in the rear about 10inch in the front there 11 inch springs cut down. thanks

redneck racing
Dirt Forum Champ
Total posts: 860
posted June 13, 2005 11:44 AM  
Switch the rear springs around and that should help with the bite. Eddie

Dirt Newbie

Total posts: 4
posted June 13, 2005 12:41 PM  
what about forward bite what is it and how do you get it drivers say i need more forward bite wht are they talking about.thanks

Dirt Forum Champ
Total posts: 715
posted June 13, 2005 08:05 PM  
Forward bite is when you lay down the gas and it takes off,the less tire"spin"the more forward bite you have.At least thats what it means around this part of the

Dirt Freak

Total posts: 474
posted June 13, 2005 09:02 PM  
If your buck toothed, then you have forward bite too.

Light it up, Baby!

Dirt Forum Racer

Total posts: 94
posted June 14, 2005 01:11 PM  
Sorta of like if you can eat corn through a picket fence

Dirt Roller

Total posts: 14
posted June 15, 2005 02:20 PM  
I agree about switching rear springs. I aso have heard about rear control arm angles. I have about 15 deg in the uppers duwn towards the frame. how much is to much? we cant change are lowers.should I change the uppers

Dirt Full Roller

Total posts: 48
posted June 16, 2005 06:38 AM  
Pinion angle helps with the forward bite, just keep that u-joint greased!

Dirt Freak

Total posts: 402
posted June 16, 2005 07:08 PM  
No actually it doesent. It just wears out the u-joint faster. The changes you make to get more pinion angle may help, shortening the uppers or moving mounting points, may help with forward bite but pinion angle by it self wont help.


Back to the Archives