Visit The Dirt Forum for More Information

Author Topic:   six blade fan
stroker21x
Dirt Full Roller

Total posts: 37
posted June 02, 2005 09:17 PM  
Ok this might sound stupid but I am sure it has been asked before,what is the difference running a steel six blade fan with the blade bent towards the rad, or bent towards the engine.Thanks

eborcim
Dirt Freak

Total posts: 303
posted June 02, 2005 11:26 PM  
One way it's pulling air, the other way it's not. The angles going toward the engine create a vacuum behind the fan, pulling air thru the rad.

gangster fords
Dirt Roller

Total posts: 13
posted June 23, 2005 12:25 AM  
fan blade pitch is designed to eather push air or pull it so even if you fip a fan blade over it will still more the air the same direction 4 blade fans will pull more air than a 6 steel will pull more than a flex..... you dont see 6 blade props on an airplane the have 2,3,4 blades

    

Back to the Archives