Visit The Dirt Forum for More Information

Author Topic:   extended upper a arms
frankthetank
Dirt Full Roller

Total posts: 64
posted May 28, 2005 04:33 AM  
Does anyone know where you can get buy stock upper metric a arms that are already extended? Ive always done my own but dont know if theyre as accurate as they should be, and we cant run tubular. Thanks

Raceman17
Dirt Maniac

Total posts: 165
posted May 28, 2005 08:40 PM  
It kinda doesnt matter how they are extended or by how much as long as you can get your caster and camber numbers right. If you extend your own and are off by 1/8" thats not going to hurt you because you can just add shims to the mount. Put the one you have on your car and check the caster camber numbers. If you can adjust the caster and camber with the shims then you are fine.
Later

neil rucker
Dirt Forum Champ
Total posts: 799
posted May 29, 2005 12:56 AM  
the longer they are, the slower the camber GAIN is, and the shorter they are, the FASTER it is. (it does matter)

    

Back to the Archives