posted May 27, 2005 06:56 PM
I run a 3300 lb metric hobby stock, the track is a high banked clay....extremely dryslick. I switch to bilstein 1044 rear shocks this year, and i took off afco 1035 and 1030 shocks which were suppose to be dryslick shocks. I was just wondering if i should put the afcos back on for dryslick or possibly just change the LR shock to the afco. I am have a little trouble getting traction coming off the corners.
racer17j Dirt Forum Champ
Total posts: 5390
posted May 28, 2005 12:41 AM
Crazy I went with them shocks this year in the rear and with a medium/heavy rf shock also The bad thing with that tie down on the left rear is unless its dryer then a popcorn fart you dont need it IF you do put it on I have found it to be good with about 1/2 inch stagger