Visit The Dirt Forum for More Information

Author Topic:   Cutting out in the corners?
Caddo 85B
Dirt Roller

Total posts: 17
posted May 24, 2005 10:08 AM  
Car runs good untill I setup for the corner and middle of the corner it falls on its face I dont know what to look for can someone help me?

iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted May 24, 2005 07:58 PM  
One of the first things to look at would be your float level in the carb

racer17j
Dirt Forum Champ
Total posts: 5390
posted May 24, 2005 08:02 PM  
check your psi on your pump it maybe be going south check the float level and the float and check the pick up I would start will the pick up and then the pump psi and then float

Caddo 85B
Dirt Roller

Total posts: 17
posted May 25, 2005 08:25 AM  
Thanks for all the help sounds like it could be the float level I had a guy work on the carb last week it was running lean kept burning pistions, how do you check the float level?

iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted May 25, 2005 08:40 AM  
What kind of carb is it

allzway
Dirt Maniac

Total posts: 136
posted May 25, 2005 08:46 AM  
We have had similiar problems and it was the powervalve.

Caddo 85B
Dirt Roller

Total posts: 17
posted May 25, 2005 09:49 AM  
quote:
Originally posted by iowa_dirt_track_girl:
What kind of carb is it

its a quadajet 4 barrel

iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted May 25, 2005 12:57 PM  
the best way that We have found to set the level is to take the top off and then turn it upside down and make sure that the float looks level that should get you close
enough

Caddo 85B
Dirt Roller

Total posts: 17
posted May 25, 2005 01:06 PM  
I will try that today thanks

    

Back to the Archives