Visit The Dirt Forum for More Information

Author Topic:   Crown Vic suspension
speed06
Dirt Full Roller

Total posts: 74
posted May 15, 2005 06:18 PM  
I was wonder if anyone is running a crown vic front stub, if so what spring / shock setup are you running. Im running 900 lf 1100 rf and it seems to roll allot.

ispin
Dirt Full Roller

Total posts: 48
posted May 16, 2005 07:10 AM  
Running 94 crown complete frame 3200# lf 1050 rf 1250

J3
Dirt Maniac

Total posts: 188
posted May 18, 2005 03:05 AM  
Running a 84 crown vic, using 925 lf and 1350 rf. on 3400# car.

[This message has been edited by J3 (edited May 18, 2005).]

speed06
Dirt Full Roller

Total posts: 74
posted May 18, 2005 06:59 AM  
what height of spring are you guys using?

ispin
Dirt Full Roller

Total posts: 48
posted May 18, 2005 10:21 AM  
9" front 11" rear

J3
Dirt Maniac

Total posts: 188
posted May 19, 2005 03:12 PM  
I have to run stock appearing springs, so i had to get the stock replacements that are 12inch but cut them to about 10inch for the front and the back has to be the stock pigtail so they are 14inch.


speed06
Dirt Full Roller

Total posts: 74
posted May 20, 2005 07:08 AM  
Thanks for the help guys, I think I will bump them up and try again this weedend.

    

Back to the Archives