Visit The Dirt Forum for More Information

Author Topic:   Looking for a good Chassis Builder
carver101
Dirt Roller

Total posts: 21
posted May 11, 2005 10:11 PM  
I am looking for a top notch chassis builder to build a new car. Must be a pro, must build cars for a living, preferably someone who specializes in dirt streetstocks. I am amazed there are no results in the search engines for street stockers, I have found several modified and late models builders though, but they dont build steet stocks. Preferably someone in the Midwest. Any referals would be appreciated.

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 1172
posted May 12, 2005 04:44 AM  
While modifieds are my main stay I have built winning stocks as well. let me know if I can be of help.

4d_POWER
Dirt Maniac

Total posts: 136
posted May 12, 2005 08:04 AM  
http://www.laynesworld.com/Terminator/term.htm
http://www.flyinbrianracin.com/ (Terminator also)

http://www.destroyerf1chassis.com/istockprices.htm
http://www.jrmotorsports.com/aboutus.cfm#%20Performance%20race%20cars
http://www.stealthracecars.com/index.html
http://www.affordablechassis.com/



GO 24
Dirt Freak

Total posts: 366
posted May 12, 2005 09:42 AM  
Try Ron @ Sardeson Racing 1-800-722-2845 www.sardesonracing.com Greenwood NE
He builds mods, stocks cars, and late models for a living plus he's a large parts supplier. Tell Him Mark Egger sent ya.
http://thunderchassis.homestead.com/ Shelby IA
http://www.jetmod.com/ Beatrice NE



sixwillwin
Dirt Freak

Total posts: 493
posted May 12, 2005 05:25 PM  
www.pro-chassis.net

------------------
The Joy of Six website

monteregal7
Dirt Maniac

Total posts: 126
posted May 12, 2005 08:05 PM  
TCA 217-345-7921
Many many wins. We get beat every week by a TCA car.
In Central IL

carver101
Dirt Roller

Total posts: 21
posted May 12, 2005 08:22 PM  
Wow, thanks for all the replies. Can anyone also tell me if a 31 Spline and 28 Spline Axle both have 24 Splines on the hub side?

ISTOCK-FAN
Dirt Roller

Total posts: 9
posted May 12, 2005 09:59 PM  
WHAT EVER YOU DO DONT CALL INTIMIDATOR CHASSIS IN DES MOINES, IOWA. YOU WILL GET RIPPED OFF. YOU CAN GIVE MONEY FOR HE CAR BUT YOU WILL GET NO CAR ITS HAPPENED TO A BUNCH OF PEOPLE SO FAR.

BUT IF YOU WERE IN IOWA I WOULD HAVE TO RECOMEND SCS FABRICATING, PRC, OR TERMINATOR CHASSIS.

boas51
Dirt Maniac

Total posts: 190
posted May 15, 2005 08:15 PM  
i believe the axle outer spline is 24 on most floater diffs, internal spline doesnt make a difference, but there may be different manufacturers who have different splines. all i have had are 24.

boas51
Dirt Maniac

Total posts: 190
posted May 15, 2005 08:17 PM  
you can take a look on my website www.angelfire.com/oz/brownovalautosports/
but i am a little far away from you.

Weld IT!!
Dirt Roller

Total posts: 11
posted May 17, 2005 09:38 PM  
WWW.PRO-CHASSIS.NET

dirtsligger99
Dirt Newbie

Total posts: 2
posted May 19, 2005 02:23 PM  
Try Larson Racing Specialists in Ames Iowa. They have the best jig built stockcar on the market and the service is outstanding. Good luck


mike33x
Dirt Newbie

Total posts: 4
posted May 19, 2005 02:25 PM  
If money is not an issue I would go with Wayne Larson Racing Specialists. I have been very happy with mine, they do cost a little more than most but I have yet to find a match for the Tech support to their cars.

Just my opinion.

-mike http://waynelarsonracing.com/

    

Back to the Archives