posted April 29, 2005 05:32 AM
We are running with a 7.25 clutch with a mechanical arm and the clutch will slip and then take ahold when the pedal is depressed again. We have practiced and it did it and raced twice and it has done it. Where should we look for the bind. New single disc with a correct radius face brg. I thought the snout on the tranny was OK but I will say we don't have a clutch return spring. Using a push cylinder. Any ideas
leapinlizard Dirt Freak
Total posts: 402
posted April 29, 2005 08:18 AM
Air in the line heating and expanding, body twist changing the linkage geometry, broken or missing or otherwise damaged engine to transmission bolts.