Visit The Dirt Forum for More Information

Author Topic:   Ignition switch
slater00
Dirt Maniac

Total posts: 147
posted April 18, 2005 01:28 PM  
Has anyone ever have the screws come out of the wires of a ignition switch, I sure did and it cost me my first A feauture win in street stocks.

------------------
http://www.freewebs.com/redneckracingteam00/index.htm

A&M Motorsports
Dirt Maniac

Total posts: 117
posted April 18, 2005 02:02 PM  
Tighten them up and put a dap of silicon on the nut or around the whole terminal.

------------------
Artie Perilloux
A & M Motorsports

robhbk24
Dirt Freak

Total posts: 372
posted April 18, 2005 02:56 PM  
losta top 5 last year when the electric fuel pump hot wire did the same thing, i was pizzed.cover the srews in sillycone after that

redneck racing
Dirt Forum Champ
Total posts: 860
posted April 19, 2005 04:50 AM  
Happened to me only one time and that was in 96, never use anything on the screws. Eddie

slater00
Dirt Maniac

Total posts: 147
posted April 19, 2005 07:20 AM  
I know for sure it's not going to ever happend again.

powerglides
Dirt Freak

Total posts: 374
posted April 20, 2005 04:34 AM  
Blue or purple Loctite just a drop. Never had one loosen.

02 Blewbyu
Dirt Full Roller

Total posts: 48
posted April 20, 2005 02:31 PM  
I used a spring loaded center punch to peen the back side of where the screws come out of the switch never had a problem.

------------------
Stomp and steer racing

    

Back to the Archives