Visit The Dirt Forum for More Information

Author Topic:   TIMING
BRIANSTINNY2
Dirt Roller

Total posts: 7
posted April 17, 2005 11:10 PM  
WHAT SHOULD THE TIMIMG BE ON A 383?I HEAR 28,30,32,34. ON 3/8 MILE!

petordragon
Dirt Maniac

Total posts: 167
posted April 18, 2005 07:03 AM  
keep advancing tell you have prob then back it down degree or two. starting will prob be biggest prob

Racer0
Dirt Maniac

Total posts: 149
posted April 18, 2005 09:31 AM  
I run mine anywhere from 32-36. Usually right at 35. Just get the thing spinning then hit the ignition switch.

iowatoolman
Dirt Freak

Total posts: 369
posted April 18, 2005 10:25 PM  
make sure that you don't have any detonation you can run it anywhere from 28-44 just watch the detontation that is what kills a motor. also the more timing the better the gas don't try 44 and use pump gas if you run that high you better be using racing gas!!!

drive hard or drive home

p.s. most small block chevys like between 32 and 36 (total timing)

redneck racing
Dirt Forum Champ
Total posts: 860
posted April 19, 2005 04:43 AM  
I run my 355 at 42 degrees. Eddie

    

Back to the Archives