Visit The Dirt Forum for More Information

Author Topic:   My 2005 IMCA Hobby Stock
Eagle71
Dirt Full Roller

Total posts: 39
posted April 16, 2005 09:17 PM  


 
Driver: Edward Anschutz Jr. (The Eagle)

Chassis: 2001 Outlaw Chassis/Home Built

Class: IMCA Hobby Stock

Sponsors: TCI Automotive, Moser Engineering, Bassett, Tri County Heating, Woody's Signs, Massart's Auto Body, Budweiser and many others.

Career Highlights: 2003 Wisconsin State Champion, 2004 ThunderHill Track Champion

Website: www.eagle71.com

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 17, 2005 07:52 AM  
Great looking car cant miss it. Eddie

Fomocosho
Dirt Maniac

Total posts: 135
posted May 01, 2005 04:27 PM  
How can you be sponsored by moser and break two axles in one weekend? Ill stay away from moser.

Eagle71
Dirt Full Roller

Total posts: 39
posted May 01, 2005 10:10 PM  
The Rearend and axles that was ran on Sat. night was NOT a Moser. It was a stock for ford rearend and axles. I have ran just about every Axle manufacturer out there and Hands down I have had the best luck with Moser. If you remember last year I got put in the wall very hard at luxy, it bent every rim on the car, including the LR axle wich I ended up running the next night and winning the feature with a severally bent axle. I'm sure that hit and the rough track was the cause for the broken axle on Friday!!! I stand behind Moser Engineering all the way!!!

Edward Anschutz Jr.

[This message has been edited by Eagle71 (edited May 02, 2005).]

Eagle71
Dirt Full Roller

Total posts: 39
posted May 02, 2005 12:23 PM  
Just wanted to let ya know Moser Stood behind the axle and are sending a new one. There the only company that has ever stood behind and axle for me.
Ed

bigbad33
Dirt Newbie

Total posts: 4
posted June 12, 2005 10:22 PM  
quote:
Originally posted by Fomocosho:
How can you be sponsored by moser and break two axles in one weekend? Ill stay away from moser.

So we are past the opening weekend and a little ways into the season so i am wondering what your thoughts are now. Have you placed your order for a moser rear end yet?

Hey Eagle, I wanted to post your stats for the season with the Moser rear end and axels in but I wasnt sure on the exact stats so how about an update on your season totals for heat and feature wins vs races run.

Fomocosho, how about you do the same with your stats. It will be a good comparison since we know you were staying away from Moser.

[This message has been edited by bigbad33 (edited June 12, 2005).]

Eljojo
Dirt Forum Champ
Total posts: 968
posted June 13, 2005 04:34 AM  
Alton Satterfield brok TWO Moser axels in one night a couple of weeks back. Can't blame this on track conditions----8" slicks on asphalt! I wouldn't let my ex-wife ride on Mosers!

bigbad33
Dirt Newbie

Total posts: 4
posted June 13, 2005 03:54 PM  
quote:
Originally posted by Eljojo:
Alton Satterfield brok TWO Moser axels in one night a couple of weeks back. Can't blame this on track conditions----8" slicks on asphalt! I wouldn't let my ex-wife ride on Mosers!

There wouldn't have been holes drilled down the center of those axels by chance would there? If so then all bets are off. I expect that you are trying to prove that your opinion is correct so you will probably say no either way. There is no shortage of torque on the axels of that asphalt car with slicks on it. After all, they use slicks for a reason and it is not to allow more slippage.

iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted June 14, 2005 04:34 AM  
We run 31 spline moser axles with the thick 1/2 inch flange and have never had a problem BUT with strange axles I would never run them again to thin flange!

Eagle71
Dirt Full Roller

Total posts: 39
posted June 14, 2005 11:14 AM  
First off with anything, sooner or later something will break. And with anything you find 2000 people for it and 100 against. Was that asphalt car running 28 or 31 spline axles? How many nights on the axles? Did the axles have a hole hole on the flange part to bolt them in? Where they running a Moser Rearend? If not, where did the rearend come from?
All these things play a part, 9 times out of 10 axles just don't break.

So far I have 10 total heats and features with 6 heat wins and 4 features on dryslick tracks. That Moser rearend hooks up great. You can't argue with results!!!

Iowa dirt track girl, glad to see your using Moser.
www.eagle71.com
Edward Anschutz Jr.

    

Back to the Archives