Visit The Dirt Forum for More Information

Author Topic:   power help out of corner?'s
41j
Dirt Roller

Total posts: 17
posted April 13, 2005 09:31 AM  
I am haveing trouble with my car really bogging down in the middle and comming out of the corner. I am talking about my motor doing this, really sluggis comming out of the corner. What do I need to changet to get this to hold rps through and out of the corner. The car holds the corner really well but the motor does not performe in the corner! ANY HELP

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted April 13, 2005 09:45 AM  
more gear

11mt40
Dirt Full Roller

Total posts: 53
posted April 13, 2005 11:19 AM  
I would agree with more gear.

41j
Dirt Roller

Total posts: 17
posted April 13, 2005 02:17 PM  
would you go with more gear though at the end of the straights you are where you want to be in rpm's?


Eljojo
Dirt Forum Champ
Total posts: 968
posted April 13, 2005 02:46 PM  
Re-degree the camshaft. If you put a 106 cam in at 102 you will have more torque at low rpms and less power at the end.

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 13, 2005 04:30 PM  
Another thought if you are running a automatic is to put a stall converter that would cure your problem and you would still have straight away speed.

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 14, 2005 07:36 PM  
I think that I might go with a new cam in my motor. I was talking around here and people say that I probably have to big of a cam in it! SO I will try that!...thanks...

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 17, 2005 07:51 AM  
thats my problem too. to much duration

    

Back to the Archives