Visit The Dirt Forum for More Information

Author Topic:   disk brake set up HELP!
Dirt Maniac

Total posts: 184
posted April 04, 2005 11:08 AM  
I'm going to put rear disk brakes on my metric street stock what master cylinder would work best and can i use larger bore caliper on back ? we cannot use adjustable prop.valve,Do i use a residual check valve on the rear. what size bore master cylinder.all parts must be stock.

Dirt Freak

Total posts: 265
posted April 04, 2005 12:16 PM  
Try getting a set of used wilwoods and master cylinders. I paid $100 for both a clutch and brake used setup. They usually have a bias pivot bar so you can adjust front to rear during red flags or cautions posibly. You can run the stock lines but I'd run new ones if it was me.

Dirt Forum Champ
Total posts: 784
posted April 04, 2005 07:37 PM  
Go with a one ton truck or if you can afford it a Corvette master cylinder. I ran a camaro calibers on the rear of my metric without any problems. I just reversed the lines on the master cylinder so the rears kicked in sooner.


Back to the Archives