Visit The Dirt Forum for More Information

Author Topic:   Q: Measuring ride height on a metric chassis
bcarter3477
Dirt Roller

Total posts: 13
posted March 29, 2005 07:14 AM  
Another quick question: Where exactly on the frame do you guys measure the ride height?

My car is an IMCA stock car. Metric frame.

Thank you in advance.

Brian

GARYAL
Dirt Forum Racer

Total posts: 94
posted March 29, 2005 08:55 AM  
TRY A SEARCH ON RIDE HEIGHT I CHECKED AND THERE ARE SEVERAL THREADS ON THE SUBJECT. IT IS LOCATED ON THE UPPER RIGHT SIDE OF THE SCREEN. IN SMALL TEXT "SEARCH"

[This message has been edited by GARYAL (edited March 29, 2005).]

stockcar5
Dirt Forum Champ
Total posts: 578
posted March 29, 2005 10:49 AM  
you can check it on the lower a frame bolt, the trailing arm bolt, the corners of the frame ect. just make sure you mark the spots and check them the same all the time!

------------------
www.geocities.com/dirtstockcar5

neil rucker
Dirt Forum Champ
Total posts: 799
posted March 29, 2005 03:56 PM  
measure frome the top of the spring bucket to the top of the lower a arm on the front end. measure from the top of rearend housing to the top or bottom of the frame rail on the rear of the car. mark these spots and CAREFULLY measure in the same spot every time.

    

Back to the Archives