Visit The Dirt Forum for More Information

Author Topic:   tilton mini clutch with howe hydro bearing
slowpoke
Dirt Full Roller

Total posts: 28
posted March 21, 2005 04:30 PM  
I bought a 7 1/4 tilton clutch and a howe trow out bearing. Put it all together a seems the clutch pedal is hard to push can see the bearing moving on the forks seems to be working. Just seem too hard to push the pedal. Any help out there,or is that the way it should be Thanks.

Istock66
unregistered Total posts: 28
posted March 21, 2005 05:49 PM           send a private message to slowpoke   Edit/Delete Message   Reply w/QuoteBBBBBB
If your useing all manual linkage it will be very very hard to push.

hyd pull or push slave takes the stiffness out of it.

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted March 22, 2005 10:53 PM  
It will be hard to push in with the throw out bearing but give it time and it will get a little easier. I don't see where 66jj see's that your using all manual linkage when the title says you bought a hydraulic throwout bearing

    

Back to the Archives