Visit The Dirt Forum for More Information

Author Topic:   intakes/whats best
BAD
Dirt Roller

Total posts: 7
posted March 02, 2005 04:49 PM  
I use a stock aluminum 4 barrel off of a 305ci is a 2 barrel 313 cast any better?

redneck racing
Dirt Forum Champ
Total posts: 860
posted March 03, 2005 10:55 AM  
I use a marine intake. Eddie

BAD
Dirt Roller

Total posts: 7
posted March 03, 2005 11:21 AM  
They say we can't use marine intakes but we can run stock aluminum/cast and we can take 1 inch out of plentium.

racin78p
Dirt Freak

Total posts: 333
posted March 03, 2005 08:03 PM  
Get a quad aluminum intake. From what I know, flows better. We have one, but can't run it at our track.

------------------
racin78p
if it ain't fun, then don't run

the_one
Dirt Full Roller

Total posts: 49
posted March 04, 2005 10:43 PM  
can you run any aftermarket intakes

RACINREBAL6410
Dirt Full Roller

Total posts: 43
posted March 05, 2005 05:00 AM  
We run an intake off of a 69 camaro with a 302 its got the holley 4 barrel holes and we theres no primary or secondary holes and they work great we picked up 20 horses on the dyno just with that

Eljojo
Dirt Forum Champ
Total posts: 968
posted March 05, 2005 05:08 AM  
Hey Rebal, is that the intake with the big "H" cast into it? I have always heard they weren't too hot-but I won't argue with the dyno!

rico 08
Dirt Forum Champ
Total posts: 1139
posted March 05, 2005 06:21 AM  
I've seen an intake like that once..it's a nice intake,not to be confused with the afb paper weight...they are extremely rare.
i'd run the aluminum...for weight savings

    

Back to the Archives