posted February 27, 2005 07:03 AM
We are converting to a 5x5 pattern. We found a astro minivan spindle that seemed to match what we had on the car except for it was 5x5 and a 12 inch rotor of course. Anybody ever hear of running astro minivan spindles??
racer17j Dirt Forum Champ
Total posts: 5390
posted February 27, 2005 07:50 AM
Maybe they were something else. The guy at the yard told us that is what they were. We know they are 5x5 and gm. It was just a front clip laying there. How could I tell what they came off of?
JT54 Dirt Maniac
Total posts: 170
posted February 27, 2005 12:46 PM
They are 5x5 and they are about the same as the big metric stuff .....it is a light weight casting .
o5racer Dirt Freak
Total posts: 402
posted February 27, 2005 07:24 PM
Actually your all right, kinda. The 2wd astros are 4 3/4 and the spindles are the same as teh impallas. The 4wd astros are 5 on 5. Nick
tfiracing Dirt Roller
Total posts: 5
posted February 28, 2005 10:52 PM
Check your years.most astros are 5x5,12"rotor and take the big stud ball joint on the lower and there is a ton of them in the s**** yards!