posted February 24, 2005 06:32 PM
just wondering what master cylinder to run on my street stock. can u just the factory one and remove the power booster? will it just bolt back on? if not which master cylinder will work? if u have part numbers would be helpful. thx jeff
racer17j Dirt Forum Champ
Total posts: 5390
posted February 24, 2005 07:39 PM
We use the original and drill 2 new holes halfway up between the four existing holes to prevent the rod from binding. Then just plug the little gaps on top and bottom and if you remove all the stops from the brake pedal you don't have to shorten the rod. Works everytime.