Visit The Dirt Forum for More Information

Author Topic:   NOVA Front rotors 5 on 5
juni
Dirt Maniac

Total posts: 184
posted February 14, 2005 01:30 PM  
Can some one tell me what year gm car that came with 5 inch bolt circle that will fit a 76 nova I thought it was a cadi but can't rember.

Donnie Ross
Dirt Freak

Total posts: 264
posted February 15, 2005 04:46 AM  
maybe late 70's seville?

racin78p
Dirt Freak

Total posts: 333
posted February 15, 2005 12:03 PM  
All I know of is for a 5 on 5 pattern that might work is 79' and up Impala, Caprice, ect. GM stuff with a 12" rotor. 11" rotor is 4 3/4". Don't know the bearing size for a 76 Nova and if they are the same though,...

------------------
racin78p
if it ain't fun, then don't run

dirty58
Dirt Maniac

Total posts: 115
posted February 15, 2005 03:16 PM  
some of the 73up trucks had 5on5 dont know if this will help but ya might try

Istock66
unregistered Total posts: 115
posted February 15, 2005 04:04 PM           send a private message to dirty58   Edit/Delete Message   Reply w/QuoteBBBBBB
you would have to use the 5 on 5 spindles and hubs. 72-75? impala is what I used to run on my pavement car.

redrilling the stock 79 nova or 79 up larger brg camaro firebird impala etc. hubs is a better option on a dirt stock car.

[This message has been edited by Istock66 (edited February 15, 2005).]

juni
Dirt Maniac

Total posts: 184
posted February 23, 2005 11:29 AM  
I used the spindles and rotors off a full size gm pre 76 they are bigger rotors and a little heavy but they fit.And were 5 inch pattern . Thanks for your input.

    

Back to the Archives