Visit The Dirt Forum for More Information

Author Topic:   help with disc beakes!
neil rucker
Dirt Forum Champ
Total posts: 799
posted February 11, 2005 05:53 PM  
putting discs on 9" rearend in stockcar. I have WILWOOD steel hats and .810 SPEEDWAY rotors. My question is which side of the rotor does the hat go on? the rotor is flat on one side, and recessed 1/4" or so on the other. the hat will bolt on either way. which one is correct? thanks, neil

joetaylor
Dirt Forum Champ
Total posts: 640
posted February 11, 2005 06:14 PM  
it all depends on where you want them what you have for room. It doesn't really matter just get them together and then see what you have for room I perfer to have them as close to the out side of the axle as possible hope this helps

neil rucker
Dirt Forum Champ
Total posts: 799
posted February 11, 2005 06:20 PM  
thanks joe. does it make any diffirence which way the bolts and nuts go? why do you want the rotor offset towards the axle? thanks again, neil

joetaylor
Dirt Forum Champ
Total posts: 640
posted February 11, 2005 07:55 PM  
I put the nut twards the in side of the car and I off set the roter to the out sidehope this helps

------------------
if every thing is under control your not fast enough

neil rucker
Dirt Forum Champ
Total posts: 799
posted February 11, 2005 09:49 PM  
thanks joe.

    

Back to the Archives